• SCSI-Programmierung HOWTO
  SCSI-Programmierung HOWTO Dieses Dokument behandelt die Installation und Programmierung von Linux generischem SCSI Interface.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site

• 3.1 Online UNIX Help - The man command
  The man command is short for "manual" and invokes a"manual" page for almost every UNIX command available on a given system. For example, to learn more about the UNIX command cat, one could type man cat in an xtermwindow.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• 3.2 Introduction to the Shell
  The program that accepts and executes UNIX commands is the "command interpreter" or "shell." The default shell used under Berkeley UNIX is the C shell or csh. Under System V UNIX, the most commonly used shell is the Bourne shell or sh. New accounts in the CIS department are set up with tcsh as their default shell. tcsh is an extended version of csh. Most, if not all, of the tcsh commands described here also work under csh
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Applet developer HOWTO
  Basically, an AfterStep applet is an X Windows application. If you can write an X windows application - you can write an applet as well. There are subtle differences or rather some things to watch out for when you write an applet that will be discussed here.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Assembly HOWTO
  This is the Linux Assembly HOWTO. This document describes how to program in assembly using FREE programming tools, focusing on development for or from the Linux Operating System on i386 platforms. Included material may or may not be applicable to other hardware and/or software platforms. Contributions about these would be gladly accepted. keywords: assembly, assembler, free, macroprocessor, preprocessor, asm, inline asm, 32-bit, x86, i386, gas, as86, nasm
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• BASH Programming How-To
  This document intends to help you to start programming basic-intermediate shell scripts.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• C++ Programming HOW-TO
  This document discusses methods to avoid memory problems in C++ and also will help you to program properly in C++ language.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Directory and File Names Under UNIX
  Directory and File Names Under UNIX
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Directory related Commands
  Directory and File Names Under UNIX
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• File related Commands
  File related Commands
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• GTK+ / Gnome Application Development
  The first chapter of the book gives you an overview of GTK+ and Gnome technologies. Chapters 2 and 3 rapidly cover the basics of GTK+ programming. These chapters move very quickly, and give you the information you need to understand the remainder of the book. For a gentler introduction to GTK+, you may wish to read the GTK+ Tutorial or Eric Harlow's book Developing Linux Applications with GTK+ and GDK.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Introduction to UNIX: Basic Commands
  This chapter describes the basic UNIX commands with a particular emphasis on the commands necessary to create and manipulate files and directories. The purpose is to present a working set of UNIX commands for the beginning UNIX user rather than an in-depth description of everything.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Java CGI HOWTO
  This HOWTO document explains how to set up your server to allow CGI programs written in Java and how to use Java to write CGI programs. Although HOWTO documents are targetted towards use with the Linux operating system, this particular one is not dependant on the particular version of unix used.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Java CGI HOWTO
  This HOWTO document explains how to set up your server to allow CGI programs written in Java and how to use Java to write CGI programs. Although HOWTO documents are targetted towards use with the Linux operating system, this particular one is not dependant on the particular version of unix used.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Java Decompiler HOWTO
  This document will help you to de-compile the Java class programs. This documents gives a list of decompilers which can reverse engineer the Java class files and generate the Java source code files.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Java Decompiler Howto
  This document will help you to de-compile the Java class programs. This documents gives a list of decompilers which can reverse engineer the Java class files and generate the Java source code files.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Java-Linux HOWTO
  This document provides a rundown of what setup and external libraries are required to use the JDK 1.0.2 for Linux.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Jaz-drive HOWTO
  This HOWTO covers the configuration and use of the 1Gb and 2Gb Iomega Jaz drives under Linux.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Linux Development on the SA-1100 Evaluation Platform
  This application note contains information on how to build executables in a Linux* cross-development environment (cross-development environment) for an IntelŪ StrongARM* SA-1100 evaluation platform (SA-1100 evaluation platform). This document is also intended for developers who want to cross-compile StrongARM ELF C* and C++* applications on a PentiumŪ processor running the Linux operating system for an SA-1100 evaluation platform.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Linux I/O port programming mini-HOWTO
  This HOWTO document describes programming hardware I/O ports and waiting for small periods of time in user-mode Linux programs running on the Intel x86 architecture.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Linux Kernel Compile HOWTO for the CSEL
  For basic information on the linux kernel and how to compile it, refer to the linux Kernel HOWTO.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Linux Kernel Hacker's Guide
  Linux Kernel Hacker's Guide Published by the Linux Documentation Project.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Linux SCSI programming HOWTO
  This document deals with programming the Linux generic SCSI interface.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• NoDevice.com - Home
  Index of Linux Programmer's Resources: Newsgroups, HowTos, FAQ, Man Pages ...
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• PHP HOW-TO
  The information in this document applies to all the operating sytems where PHP is ported that is - Linux, Windows 95/NT, OS/2, all flavors of Unix like Solaris, HPUX, AIX, SCO, Sinix, BSD, etc..
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Printer related Commands
  Printer related Commands
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Program Library HOWTO
  This HOWTO for programmers discusses how to create and use program libraries on Linux. This includes static libraries, shared libraries, and dynamically loaded libraries.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Programming Languages mini-HOWTO
  A brief comparison of major programming languages for Linux and major libraries for creating graphical user interfaces (GUIs) under Linux
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• RCS mini-HOWTO
  This document covers basic installation and usage of RCS, the GNU Revision Control System, under Linux. It also covers the installation of the diff(1) and diff3(1) utilities, which are necessary for RCS to operate. This document may be reproduced freely, in whole or in part, provided that any usage of this document conforms to the general copyright notice of the HOWTO series of the Linux Documentation Project.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Secure Programming for Linux and Unix HOWTO
  This document provides a set of design and implementation guidelines for writing secure programs for Linux and Unix systems.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Serial-Programming-HOWTO
  This document describes how to program communications with devices over a serial port on a Linux box.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• Software Release Practice HOWTO
  This HOWTO describes good release practices for Linux open-source projects. By following these practices, you will make it as easy as possible for users to build your code and use it, and for other developers to understand your code and cooperate with you to improve. This document is a must-read for novice developers. Experienced developers should review it when they are about to release a new project. It will be revised periodically to reflect the evolution of good-practice standards.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• The big dummies guide to graphics programming
  This Document tries to give some enlightenment about pixel oriented graphics programming with lowlevel graphics libraries. It is intended for people that have never ever used a pixel oriented graphics library before. If you have, it might be a bit boring.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• The KDE 2 Developers Guide
  This Handbook is a collection of various documentation about KDE 2 development.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• The KDE Library Reference Guide
  This handbook is part of the KDevelop Integrated Development Environment and is also licensed under the GNU General Public License; see Chapter Copyright for more information.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• The Linux GCC HOWTO
  This document covers how to set up the GNU C compiler and development libraries under Linux, and gives an overview of compiling, linking, running and debugging programs under it. Most of the material in it has been taken from Mitch D'Souza's GCC-FAQ, which it replaces, or the ELF-HOWTO, which it will eventually largely replace. This is the first publically released version (despite the version number; that's an artifact of RCS). Feedback is welcomed.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• The Linux Serial Programming HOWTO
  This document describes how to program communications with devices over a serial port on a Linux box.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site


• The Linux-PAM Application Developers' Guide
  This manual documents what an application developer needs to know about the Linux-PAM library. It describes how an application might use the Linux-PAM library to authenticate users.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site

• Kompilasi Kernel
  Siapkan kesabaran, terutama bagi user yang melakukan kompilasi kernel di mesin yang memiliki prosesor lambat dan sedikit memori. Kompilasi bisa memakan waktu 10 menit pada mesin dengan prosesor Pentium yang cepat hingga sampai 1,5 jam pada mesin Intel 386.
   Kommentar schreiben/lesen (0)
| Bewerten Sie diese Site

Copyright 2000 Internet.com Corp. Alle Rechte vorbehalten.