>>> rfc2042

Network Working Group                                         B. Manning
Request for Comments: 2042                                           ISI
Category: Informational                                     January 1997


                  Registering New BGP Attribute Types

Status of this Memo

   This memo provides information for the Internet community.  This memo
   does not specify an Internet standard of any kind.  Distribution of
   this memo is unlimited.

Process:

   This document describes the process for creating new BGP attribute
   type codes.  Basic attribute type codes are described in RFC 1771,
   pages 12 through 15.  These, and new attribute type codes that are
   used in the Internet are registered with the IANA.

   The actual process will involve the documentation of such attribute
   type codes in an RFC.  There is no intention of segmenting the code
   space into public/private or IP/OSI or any other sectioning.

   As each attribute type code is in the process of being developed, it
   will use an octet value of 255, which will be reserved for this use.
   At the time an attribute type code is assigned a number by the IANA,
   the documetnation and code base will be updated to reflect the
   authorized attribute type code value.

   IANA maintained values will be published in the periodically updated
   Assigned Numbers RFC [6].  Requests for assignment of a new attribute
   type code should be sent to the IANA (IANA@IANA.ORG) with a subject
   that includes the phrase "BGP Attribute Type".

















Manning                      Informational                      [Page 1]

RFC 2042                  BGP Atrribute Types               January 1997


   Currently in use attribute type codes are listed below:

                 Value      Code                             Reference

                   1       ORIGIN                                  [1]
                   2       AS_PATH                                 [1]
                   3       NEXT_HOP                                [1]
                   4       MULTI_EXIT_DISC                         [1]
                   5       LOCAL_PREF                              [1]
                   6       ATOMIC_AGGREGATE                        [1]
                   7       AGGREGATOR                              [1]
                   8       COMMUNITY                               [2]
                   9       ORIGINATOR_ID                           [3]
                   10      CLUSTER_LIST                            [3]
                   11      DPA                                     [4]
                   12      ADVERTISER                              [5]
                   13      RCID_PATH / CLUSTER_ID                  [5]
                   ...
                   255     reserved for development



Security Considerations

   Security issues are not discussed in this memo.

References

   [1] Rekhter, Y., and Li, T., "A Border Gateway Protocol 4 (BGP-4)",
       RFC 1771, March 1995.

   [2] Chandra, R., Traina, P., and T. Li, "BGP Communities
       Attribute", RFC 1997, August 1996.

   [3] Bates, T., Chandra, R, "BGP Route Reflection An alternative
       to full mesh IBGP", RFC 1998, June 1996.

   [4] Chen, E., Bates, T., "Destination Preference Attribute for BGP",
       Work in progress, March 1996.

   [5] Haskin, D., "A BGP/IDRP Route Server alternative to a full mesh
       routing", RFC 1863, October 1995.

   [6] Reynolds, J., and J. Postel, "Assigned Numbers", STD 2, RFC 1700,
       ISI, October 1994.






Manning                      Informational                      [Page 2]

RFC 2042                  BGP Atrribute Types               January 1997


Author's Address

   Bill Manning
   USC/ISI
   4676 Admiralty Way
   Marina del Rey, CA. 90292

   Phone: 01.310.822.1511
   EMail: bmanning@isi.edu










































Manning                      Informational                      [Page 3]